Click image to view full size image
7.5KW Drywall metal Framing Channel Roll Forming Machine with 45 Forge Steel Shaft
Specifications of Drywall metal Framing Drywall Roll Forming Machine
| Product Name | Item | Description |
| Drywall metal Framing Drywall Roll Forming Machine | Coil width | Depend on customer profile |
| Working speed | 12-15m/min (not contain cutting) | |
| Roll station | 10 stations | |
| Material of roller | Gcr15 steel, polished and coated with chrome HRC58-62 | |
| Material of main shaft | 45forge steel | |
| Roller diameter | 56mm | |
| Main power | 7.5KW | |
| Forming thickness | 0.5mm-1.5mm mild steel | |
| Transmission | by single line 1.0 inch Chains | |
| Size of main machine | about 6000 x 800 x1200 (L x W x H) | |
| Weight | about 4000Kgs | |
| Color of machine | Blue and yellow (it is also can changed depend on customer request) |
Other Part
Cutting
(1) Machine adopt hydraulic cutting
(2) Cutting after forming: Cut the sheet after roll forming to required length
(3) Cutting motion: The main machine automatically stops and the cutting will take place. After the cutting, the main machine will automatically start.
(4) Material of blade: CR12with heat treatment
(5) Length measuring: Automatic length measuring
(6) Tolerance of length: 3m+/- 1.5mm
Composition of Drywall metal Framing Drywall Roll Forming Machine
Roll forming main machine……………………………1 unit
Manual de-coiler……………………………………&n
7.5KW Drywall Metal Framing Channel Roll Forming Machine with 45 Forge Steel Shaft
